Oakland Living Black Rectangle Aluminum Dining Height Outdoor Dining Table : Instructions / Assembly

Assembly Instructions

Item #: 1827-RECTANGLE-68-ORNATE-TABLE

Parts List Quantity

Table Top

Table Leg

Center Plate

#8 Hex Head Short Bolt

#8 Hex Head Long Bolt

Flat Washer

Lock Washer

Thank you for your purchase! We want to make sure your assembly goes

smoothly so please feel free to email us at patioservices@gmail.com if you

have any questions.

CAUTION: KEEP PARTS AND PACKAGING OUT OF REACH OF CHILDREN.

Small hardware can be a choking hazard. Packaging could lead to

suffocation. Keep children away until after assembly and clean-up.

ASSEMBLY

We suggest you assemble the product on a soft flat surface to protect the finish. Two people are required

to assemble this product.

Step 1. Place the TABLETOP face down on a soft flat surface. Attach the LEGS to the table using 8HEX

SHORT BOLTS, FLAT and LOCK WASHERS. The lock washer is fitted against the bolt head and

the flat washer between the table top and lock washer. Finger-tighten the bolts. Repeat this process

for each of the four legs.

Step 2. Place the CENTRE PLATE between the four legs. Align the holes and using the 8HEX LONG

BOLTS, FLAT and LOCK WASHERS attach to the legs. Use the same process when attaching the

bolts. Finger-tighten only at this stage.

Step 3. When all bolts and washers are in place, tighten all bolts firmly, but do not over-tighten. Tighten the

bolts to the table-top first ensuring that you tighten the bolts in a diagonally opposite order.

Step 4. Using 2 people, turn over the assembled table.

Caution:

This unit is manufactured with cast aluminum parts and is brittle. DO NOT force any part of the assembly and

DO NOT over-tighten the bolts. This could result in serious damage.