Instructions / Assembly

Assembly Instructions
Item #: 1088-ROUND-42-MODERN-TABLE
Parts List
Quantity
Table Top
Table Leg
Centre Plate
8Hex Head Long Bolt
8Hex Head Short Bolt
Flat Washer
Spring Washer
1
4
1
8
8
16
16
Thank you for your purchase! We want to make sure your assembly
goes smoothly so please feel free to email us at
[e-mail] if you have any questions.
CAUTION: KEEP PARTS AND PACKAGING OUT OF REACH OF
CHILDREN. Small hardware can be a choking hazard. Packaging could
lead to suffocation. Keep children away until after assembly and
clean-up.
ASSEMBLY
We suggest you assemble this item on a soft surface to protect the finish. Two people are
required for this assembly.
Step 1. Place the tabletop face down on a soft flat surface. Attach the legs to the table using
8Hex Short Bolts, spring and flat washers. Ensure the spring washer is fitted between the flat
washer and the bolt head. Finger-tighten only.
Step 2. Place the center plate between the four legs. Align the holes and use the 8Hex Long
Bolts, spring and flat washers (in the same order as above) to attach to the legs. Finger-tighten
only.
Step 3. When all the bolts and washers are in place, carefully tighten all bolts, but DO NOT
over tighten. We recommend you tighten the bolts on the table top first, then the center plate.
Tighten the bolts in a diagonally opposite order.
Step 4. Using 2 people, turn over the assembled table.
Caution:
This unit is manufactured of cast aluminum parts and is brittle. DO NOT force any part of the
assembly and DO NOT over-tighten the bolts. This could result in serious damage.