Use and Care Guide

1.4 IMPORTANT INSTRUCTIONS
To avoid appliance damage:
Do not drop the bottle.
– Dropping the bottle may cause breakage.
Fill with clean potable water only.
– Filling the bottle with fluids other than clean potable water
may damabe cartridge and render the product useless.
Do not overfill the bottle.
– Overfilling may cause leakage at the fill plug.
Do not run water into the charger port.
– Doing so may short the battery/electronics.
NOTICE
SAFETY
(cont’d)
4
SPECIFICATIONS
Materials
Weight
(empty)
Dimensions
(in mm)
Reservoir
Capacity
Water
Temperature
Water
Quality
Ambient
Air
Rechargable
Battery
Useful
Battery
Life
Model #
Certifications
EPA
Establishment
Number
PC/ABS Impact Resistant Plastic
~ 2 lb (0.9 kg)
4 in x 4 in x 10 in
(100 mm x 100 mm x 250 mm)
14 oz (400 ml)
40°F to 86°F (4°C to 30°C)
Hardness ≤ 250 ppm CACO3
(May Extend Life of Unit)
Conductivity >50 μS/cm
(Cell damage may result from
use of distilled or deionized water)
40°F to 104°F (4°C to 40°C)
7.4 V Li-lon
(Charger uses 100 V AC to
240 V AC, 50/60 Hz)
5000 Reservoir Fills
or 500 Charges (Typical)
SB-100
CE, TUV, RoHS, WEEE
089373-MA-001
TECHNICAL DATA
5