MSDS

Reference number: SD-DS-W004
Revision: June.6 2013
MATERIAL SAFETY DATA SHEET
Page 3 of 5
Product name Nickel Metal Hydride Batter（SDH-8X48AA1500mAh）
7. HANDLING AND STORAGE
Handling
Technical measures/Precautions
No special technical protective measures required.
Do not obstruct safety vent by soldering or welding tabs on the positive top.
Safe handling advice
Avoid contact with skin and eyes.
Use personal protective equipment.
Storage
Technical measures/Storage conditions
Keep in a dry, cool and well-ventilated place, preferably in the temperature range of +5 to +25°C at 65%(+-5%)
relative humidity.
Keep away from heat and sources of ignition.
Ensure battery terminals are protected during storage.
8. EXPOSURE CONTROLS / PERSONAL PROTECTION
Occupational exposure controls
Engineering measures
Ensure adequate ventilation, especially in confined areas.
Personal protective equipment
Not required under normal use.
The information below refers to exposure to the ingredients.
Respiratory protection
Wear a positive-pressure supplied-air respirator with full face piece.
Hand protection
Neoprene gloves (EN374).
Eye protection
Safety glasses with side-shields conforming to EN166.
Skin and body protection
Boots, apron, protective suit.
Hygiene measures
General industrial hygiene practice.
Environmental exposure controls
The information below refers to exposure to the ingredients
Prevent product from entering drains.
Do not allow material to contaminate ground water system.
9. PHYSICAL AND CHEMICAL PROPERTIES
General Information
Form battery (sealed unit) Colour not applicable Odour odourless
Important Health Safety and Environmental Information
not applicable