Operation Manual

212 Managing Your PDA Phone
To perform a soft reset
Use the stylus to press the RESET button found at the bottom of your
device. Your device restarts and displays the Today screen.
RESET button
Hard reset
You can also perform a hard reset (also known as a full reset). A hard
reset should be performed only if a normal reset does not solve a system
problem. After a hard reset, the device is restored to its default settings - the
way it was when you first purchased it and turned it on. Any programmes
you installed, data you entered, and settings you customised on your
device will be lost. Only Windows Mobile® software and other pre-installed
programmes will remain.
Important If Encrypt files placed on storage cards is or was enabled before, then
backup all files from the storage card before using Clear Storage, hard
reset or updating the ROM system software. Otherwise you will no longer
be able to access the encrypted files on the storage card. Use ActiveSync
or Windows Mobile Device Center to transfer files between your storage
card and computer. After the procedure, copy your files back to the
storage card.
To perform a hard reset using device keys
1. Press and hold the left SOFT KEY and the right SOFT KEY, and at the
same time, use the stylus to press the RESET button at the bottom of
your device.
2. Release the stylus, but continue pressing the two SOFT KEYs until you
see the following message on the screen: