Operation Manual

Getting Connected 159
Connect to wireless networks
After Wi-Fi is turned on in Comm Manager, your device scans for available
wireless networks in your area.
To connect to a wireless network
1. The network names of the
detected wireless networks will be
displayed on a pop-up message
window. Tap the desired wireless
network, then tap OK.
2. On the next pop-up message window, tap The Internet if the wireless
network connects your device to the Internet. Otherwise, tap Work if
the wireless network connects your device to a private network.
3. If the wireless network is secured by a network key, enter this key,
then tap Connect.
Next time you use your device to detect wireless networks, you will not see
the pop-up message windows again, and you will not be prompted to enter
the network key of the previously accessed wireless network (unless you
perform a hard reset which will erase custom settings on your device).
Note Wi-Fi networks are self-discoverable, which means no additional steps are
required for your device to connect to a Wi-Fi network. It may be necessary
to provide a username and password for certain closed wireless networks.