Operation Manual

Getting Started 33
1.4 Using the Strap Holder
The strap holder at the bottom panel of your device allows you to attach a wrist
strap, neck lanyard, or string accessory.
To attach a strap, lanyard or string accessory to the strap holder
1.
Remove the back cover.
2.
Insert the loop of the strap, lanyard
or string accessory through the strap
holder hole on the back cover.
Tip To pass through the strap holder
hole easier, push the loop into
the strap holder hole using a
pointed object such as a needle or
toothpick.
3. Attach the loop over the small
t-shaped hook at the bottom of the
device.
4.
Secure the strap, lanyard or string
accessory on the t-shaped hook as
shown on the illustration on the
right.
5.
Replace the back cover.