Operation Manual

Experiencing Multimedia 189
1 Resolution. The resolution icon indicates the current resolution. Tap
to toggle among the different resolution options:
/ / / /
/
2 Storage. Tap to toggle between saving captured photos or video clips
on the device memory or on the built-in flash storage card, called
NAND Flash . You can also save the captured photos and video
clips on a storage card if you have installed a storage card on your
device. In such a case, tap Storage Card 1 or Storage Card 2.
3 Flash Light. Tap to turn on or to turn off the flash light that is
located at the back of the device. The Flash Light option is available
for Photo, Contacts Picture, Picture Theme, and Panorama capture
modes.
4 Self-timer. Tap to set the self-timer to 2 seconds, 10 seconds, or Off
when in the Photo or Contacts Picture mode. When you press the
Jog Wheel, CAMERA button, or ENTER button to capture a still image,
it starts to count down, and then captures a still image after the
assigned time.
5 Brightness. Tapping the minus/plus icon ( / ) decreases or
increases the brightness level.
6 White Balance. White balance enables the camera to capture
colours more accurately in different lighting conditions. White
balance settings include Auto ( ), Daylight ( ), Night ( ),
Incandescent ( ), and Fluorescent ( ).
Zooming
Before taking a picture or shooting video, you can zoom in on your subject
by pressing NAVIGATION up (landscape orientation) on your device or by
tapping the Zoom In button ( ) above the Zoom Bar. When the zooming
limit is reached, you will hear a beep. To zoom out, press NAVIGATION down
(landscape orientation) or tap the Zoom Out button ( ).