Operation Manual

Pocket PC Phone User Manual
86
Getting
Connected
n Insert your Pocket PC Phone to your PC USB connection (using the USB sync cable or
cradle).
Before setting up an USB modem, you must verify that you have the two les, USBMDM
and USBModem_Dialer, on the Pocket PC Phone Companion CD. Insert the Companion
CD into the CD-Rom of your PC and perform the settings as follows:
1. Tap the Start menu > Programs > Wireless Modem.
2. Select the USB connection type from the drop-down list and insert the USB cable
adapter.
3. Tap the Start button on the Wireless Modem screen of your Pocket PC Phone.
4. A Found New Hardware message will pop up on your desktop PC.
5. Select the Display a list of the known drivers for this device so that I can choose a
specic driver option, and then click
Next.
6. Select Modem from the Hardware types list, and then Next.
7. Click the Have Disk button, and then
Next.
8. Select the recognized USB Modem in the Models list, and then
Next.
After the installation
is completed, select Finish.
9. After the installation, a new USB modem will be found in the Modem list by tapping Start
> Settings > Control Panel > Phone and Modem Options on your PC.
10.Double click the USBModem_Dialer le on the Pocket PC Phone Companion CD and set
the GPRS settings (enter the APN assigned by your ISP) in the blank text box and press
Dial to start the connection.
Connect via Bluetooth
Before starting to use your Pocket PC Phone as a Bluetooth modem, you must be sure that
your PC is a Bluetooth-enabled device. In addition, you still need to check the following:
n A GPRS SIM card is inserted in your Pocket PC Phone.
n Disable the ActiveSync BT port connection of your PC.
n Disable the Infrared function by tapping the Start menu > Settings > the Connections
tab > Beam. Uncheck Receive all incoming beams.
1. Select the Start menu > Programs > Wireless Modem.
2. Select the Bluetooth connection type from the drop-down list, and tap the Start button.
3. Open your Pocket PC Phone from the Bluetooth application installed on your PC.
The interface of the Bluetooth application installed on your PC will vary, depending on the
Bluetooth module embedded or attached in your PC when you purchased it. Follow the
installation instructions of the connected Bluetooth device's manual.