Operation Manual

Pocket PC Phone User Manual

Getting

Connected

Getting

Connected

1. Click Start > Settings > Control Panel > Network and Dial-up Connections > Make

New Connection.

2. To continue, tap Next.

Select Dial-up to the Internet. Tap Next.

4. Enable the option I want to set up my Internet connection manually, or I want to connect

through a local area network (LAN) button, and

Next.

5. Select I connect through a phone line and a modem option, and then

Next.

6. Enable the Use area code and dialing rules checkbox and enter the telephone number

*99#, and then Next.

7. Enter the username and password you use to log on to your ISP, and then click

Next.

8. Enter a name for this connection, and then

Next.

9. Select No when the installation wizard asks you to set up an Internet mail account, and

then click

Next.

10.After the installation is completed, click Finish.

Settings on your Pocket PC Phone

You need to complete these actions before you start using the Wireless Modem on your

Pocket PC Phone:

n A GPRS SIM card is inserted in your Pocket PC Phone.

Disable the ActiveSync com port connection of your PC.

n Disable the Infrared function by tapping the Start menu > Settings > the Connections

tab > Beam. Uncheck Receive all incoming beams.

n Insert your Pocket PC Phone to your PC/Notebook by Serial connection (using the optional

serial sync cable).

1. Tap the Start menu > Programs > Wireless Modem.

2. Select the Serial connection type from the drop-down list and insert the synchronization

cable adapter.

3. Make sure that you have connected your device with a serial sync cable if you choose

Serial connection to a notebook or PC, tap Start.

Now you can start to dial the new dial-up connection you have created by tapping Start >

Settings > the Control Panel > Network and Dial-up Connections on your PC.

Connecting via USB Port

As with the connection via serial or IrDA, you need to check the following below before you

start using the Wireless Modem on your Pocket PC Phone via USB connection:

n A GPRS SIM card is inserted in your Pocket PC Phone.

n Disable the ActiveSync com port connection of your PC.

n Disable the Infrared function by tapping the Start menu > Settings > the Connections

tab > Beam, and then uncheck Receive all incoming beams.