Operation Manual

Pocket PC Phone User Manual

Getting

Connected

Getting

Connected

6.10 Wireless Modem

This utility will simulate your device as a wireless modem, and let your PC/Notebook be

connected to a wireless network. Wireless Modem allows you to select the various wireless

connection types: Serial, IrDA, USB, or Bluetooth.

Connecting via Serial Port or IrDA

Before create a new modem via IrDA connection, you need install the software IrCOMM2k.

IrCOMM2k is a driver for Windows 2000 and XP. It emulates a serial port which can be used

to exchange data with mobile devices. Go to http://www.ircomm2k.de to download the driver

and install it on your PC by following the installation instruction provided on the web.

If you are using a Serial port connection, you can just start the settings on your PC and your

Pocket PC Phone as described below. No additional driver needs to be installed.

Settings on your PC

Contact your ISP to get the APN (Access Point Name). Before you start using your Wire-

less Modem with a serial port or IrDA connection, you need to create a new modem on

your PC rst:

1. Click Start > Settings > Control Panel > Phone and Modem Options.

Add a new modem by selecting the Modem tab.

3. Enable the checkbox Don't detect my modem; I will select it from a list.

4. Select Standard Modem Types in the Manufacturers eld, select Standard 33600 bps

Modem, then select Next.

5. Select your modem port and click Next.

6. When a

Modem installation is nished!

screen appears, click Finish to go back to the

Modem tab mentioned in Step 2. Now you can see a Standard 33600 bps Modem in the

modem list.

7. Highlight the modem you just created, click the Properties button, and select the Advanced

tab.

8. Enter the complete string in the Extra initialization commands: eld: AT+CGDCONT=1

,"IP","APN","",0,0

9. Remember to click the Change Default Preferences button after entering the required

string as mentioned above.

10.Click the General tab and set the Float control by selecting None from the drop-down list.

Keep pressing OK until the modem installation wizard exits.

A new standard modem is now set up successfully on your PC, but you still need to create

a new dial-up connection: