Operation Manual
Pocket PC Phone User Manual
82
Pocket PC Phone User Manual
83
Getting
Connected
Getting
Connected
One Bluetooth device must be the host of the personal area network. Other Bluetooth
devices join the network as clients. The host can accept and reject clients on an individual
basis.
To host a Personal Area Network:
1. Select Bluetooth Manager > New > Connect > Join a personal network > Next.
2. On the next wizard screen, select Host a personal network > Next.
3. Add remote devices to the Bluetooth Personal Area Network, if desired:
Tap the Add button and select the device to be added.
Add additional devices, if desired. You can select up to eight total, including the host.
After all the desired devices have been added, tap OK to complete the setup and close the
wizard. Adding devices is optional; devices do not have to be added to the personal area
network when the Host is congured. Devices can join the personal area network later.
To join a Personal Area Network:
1. Select Bluetooth Manager > New > Connect > Join a personal network > Next.
2. On the next wizard screen select Join a personal network > Next.
When Bluetooth Browser appears, select the host of the personal area network, and
then tap Next to establish a connection to the personal area network. If asked to enter IP
network settings, select Use server-assigned IP address, and then tap OK.
The network host’s authorization and authentication settings, and/or its Personal Area
Network service availability may prevent you from joining the network. Any application
that requires a network connection can use the Personal Area Network connection.
My Shortcuts
The default tab on the Bluetooth Manager is My Shortcuts. This screen displays the icons
that have been created for connections to other devices. The icons provide visual feedback
about the status of the connection to which they are linked.
The double-tap is context sensitive:
n If the connection is not open, double-tap its icon to establish a connection.
n If the connection is open, double-tap its icon to display the connection’s status. Connections
can also be opened/closed, and other options accessed, using the tap-and-hold technique. If
you tap a connection icon and hold the stylus in place for a few seconds, a context sensitive
menu appears.
Active Connections
This tab displays the active Outgoing and Incoming Connections on your Pocket PC
Phone.