Operation Manual

Pocket PC Phone User Manual 138
Pocket PC Phone User Manual
139
The Pop-Up Window
Click GPRS Monitor icon on the taskbar to get detailed information such as:
n Trafc (for the session, day or week depending on your settings).
n Costs (for the session, day or week depending on your settings).
n Data block usage: Show how much of the current data block you have already
transferred.
n Current Speed.
n Day inclusive amount left.
n Month inclusive amount left.
n Connection usage graph for the past 7 days.
The pop-up window also contains information about the current prole and gives possibility
to establish/nish the GPRS connection. Almost all areas in the pop-up window are clickable.
You can tap on the graph and see detailed charts or tap on the prole to change it. If you tap
on the battery or backlight bar the corresponding Settings applet will be shown.
Change between proles
Usually there is more than one connection that can be used or there are different settings
in different situations. GPRS roaming charges typically vary according to different mobile
service providers. For this reason, enable proles within GPRS Monitor to measure the
connection differently in these situations.
1. Select the Start menu > Programs > GPRS Monitor.
2. From the Tools menu, select Proles.
3. On the Proles dialog that appears, you can change active proles, rename them, and
clear trafc history for a certain prole.
If all your proles are congures to use different connections, you may check the Auto
change prole box and GPRS Monitor will automatically change active prole, depending
on what connection you use.
After you select a prole for the rst time, make sure you congure its settings, tariff details
etc. Select Options from the Tools menu, and check the Auto change prole box.
GPRS Trafc Report
GPRS Monitor also provides you a report generation tool. With its help, you can generate
a detailed text report of your network connection usage for a given period of time. Select
the Start menu > Programs > GPRS Monitor > the Report tab.
Applications
Applications