Operation Manual

Experiencing Multimedia 179
• Touch and Press. Requires you to touch the ENTER button to
activate the auto-focus; when focus is set, press the ENTER button
to take the shot.
• Touch. Requires you to touch the ENTER button to activate auto-
focus; when focus is set, Camera automatically takes the shot.
• Full Press. Requires you to press the ENTER button to activate
auto-focus; when focus is set, Camera automatically takes the shot.
• Review Duration. Set a time length for displaying the captured
image/video on the Review screen. Select No Limit if you do not want
to impose a time limit. Select No Review to immediately return to the
live Camera screen after capturing and saving.
• Image Properties. This option lets you adjust the capture properties,
such as Contrast, Saturation, and Sharpness.
1 Tap a property to adjust.
2 Tap to reset all properties to
their default values.
3 Tap to save the settings.
4
Tap / or press
NAVIGATION left/right
(Landscape orientation) to
increase/decrease the value.
5 Tap to close the submenu
without applying and saving the
changes.
2
3
4
1
5
• Effect. Choose a special effect such as Grayscale, Sepia, or others, to
apply to your photos or video clips.
• Metering Mode. Select a metering mode to allow the camera to
measure the amount of light and calculate the best-fit exposure value
before capturing. Choose either Center Area to measure light using
the center area of the subject, or Average to measure light using the
area around the subject.
• Prefix. When Default is selected as the prefix, the file name of each
new captured file is set to “IMAGE” or “VIDEO” followed by a sequential