Operation Manual

Experiencing Multimedia 217
• Prefix. When Default is selected as the prefix, the file name of each new
captured file is set to “IMAGE” or “VIDEO” followed by a sequential number, for
example: IMAGE_001.jpg. You may also choose to name files using either the
current Date or Date & Time as the prefix.
Note If you set the Camera to save captured photos to a storage card, the prefix
cannot be selected. Captured photos will be named using the convention
IMAGnnnn.jpg (where ‘nnnn’ is the counter) which is the DCIM (Digital Camera
Images) naming standard, and will be saved to the \DCIM\100MEDIA folder on
the storage card.
• Counter. To reset the file naming counter back to 1, tap Reset.
• Flicker Adjustment. When taking indoor shots, flicker on the camera screen
may be caused by inconsistencies between the vertical scan rate of the
camera display and the flicker frequency of fluorescent lighting. To reduce
flicker, you can change the flicker adjustment setting to Auto or to the proper
frequency (50Hz or 60Hz) of the power in the country where your device is
being used.
• Grid (Photo mode). Choose whether to show a grid on the Camera screen.
Showing a grid helps you frame and centre your subject easily and accurately.
Grid marks
• Record with Audio (Video and MMS Video mode). Select On to record audio