Operation Manual

150 Internet
GPRS/3G
Use GPRS/3G (or EDGE, if available) to connect to the Internet and to send and
receive e-mail and picture messages on your device. Check you have an O2 “data” or
“web” included tariff to ensure you keep charges to a minimum.
GPRS/3G settings are already preconfigured on your device, and your device is
ready to use O2’s GPRS/3G services. Do not change the connection settings as this
may cause services to stop working.
Note If you did not complete the auto-configuration process before, follow the instructions
in “To manually select the network operator to use for data connections” in Chapter
13 to configure the data connection for your device.
To add a new GPRS/3G connection
When you need to add another GPRS/3G connection on your device, obtain the
Access point name from your wireless service provider. Also, check if the GPRS/3G
network requires a user name and password.
1. On the Home screen, slide to the Settings tab and then tap All Settings.
2. On the Connections tab, tap Connections.
3. In My ISP, tap Add a new modem connection.
4. On the Make New Connection screen, enter a name for the connection.