Operation Manual

116 Exchanging Messages
To configure MMS message settings
1. Tap Start > Messaging > SMS \ MMS.
2. Tap Menu > MMS Options. The Settings screen then appears.
3. In the Preferences tab, choose from the available options according to your
needs.
4. Tap the Servers tab and check if
your device is preset with MMS
server settings.
If there are no preset settings,
tap New and enter the following
information, which you obtained
from your wireless service
provider:
• Gateway. Location of the MMS server, which is usually in the form of an IP
address.
• Port number. HTTP port number used for connecting to the MMS server
and for file transfer.
• Server address. URL address of the server where MMS messages are
stored.
• Connect via. Select the connection that your device uses for MMS
messages.
• Send limit. Select the maximum MMS message size allowed by your
wireless service provider.
• WAP version. Select either WAP 1.2 or WAP 2.0, depending on which
one is being used by your wireless service provider. For O2 UK, you should
use WAP 2.0.