User Manual

User's guide O&O DiskImage Command specific parameter
Valid values: "yes", "no", "true" and "false"
Example
<sequential_access>true</sequential_access>
set_active
Labels whether "enable" or "disable" should be set for the selected drive.
Valid values: "yes", "no", "true" and "false"
Example
<set_active>true</set_active>
set_bootable_partition_bootable
Automatic setting of the bootable source partition as bootable. The confirmation dialogue will be
disabled with this parameter.
Valid values: "yes", "no", "true" and "false"
Example
<set_bootable_partition_bootable>yes
</set_bootable_partition_bootable>
size
The size of an object in bytes.
Example
<size>1073741824</size>
snapshot
As an option to the parameter "force_dismount", the installed filter drivers will help log changes
in data so that unchanged data can be included in the backup.
See also parameter "vss".
Example
<snapshot>true</snapshot>
system_volume
Label indicating that only the system volume or system partition will be drawn into the processing.
Valid values: "yes", "no", "true" and "false"
Example
<system_volume>yes</system_volume>
target_begin
Defines a position at the beginning of a target disk.
Example
<target_drivenumber>1</target_drivenumber>
<target_begin>32256</target_begin>
213 / 235