User Manual

User's guide O&O DiskImage Command specific parameter
Possible read errors that occur should be ignored without a confirmation dialogue. These sectors
will be skipped during the read procedure and noted in the log file.
Valid values: "yes", "no", "true" and "false"
Example
<ignored_read_errors>yes</ignored_read_errors>
image_begin
Defines a position at the beginning of a disk and indicates a region of the image file.
Example
<image_drivenumber>2</image_drivenumber>
<image_begin>1048576</image_begin>
image_drivenumber
Defines the number of the selected disk from the image.
Example
<image_drivenumber>1</image_drivenumber>
image_driveletter
Defines the drive letters of the selected drive from the image.
Example
<image_driveletter>D</image_driveletter>
image_name
Defines the name of the image file including path.
Example
<image_name>C:ImageFilesImage20071127.omg</image_name>
image_object_id
Defines the ID of the selected object from/in the image.
Example
<image_object_id>3</image_object_id>
image_type
Label indicating the type of imaging, i.e., the selected imaging method.
used sector imaging of the used sectors
forensic sector forensic imaging of all sectors of a drive
direct forensic sector direct forensic imaging of all sectors of a drive
Example
<image_type>used sector</image_type>
is_superfloppy
Labels a storage volume as "superfloppy". Such a disk consists of one drive only and contains no
system regions, i.e., no partition structure will be written on it.
Valid values: "yes", "no", "true" and "false"
209 / 235