User Manual

User's guide O&O DiskImage Command specific parameter

fill_empty_blocks

Fills empty regions on the target drive with the value „0“.

Valid values: "yes", "no", "true" and "false"

Example

<fill_empty_blocks>no</fill_empty_blocks>

floppy_devices

Use this parameter when you only want to initialize floppy drives and prepare them for display.

Valid values: "yes", "no", "true" and "false"

Example

<floppy_devices>true</floppy_devices>

force_dismount

Forces the cancellation of the volume’s deployment when necessary. All files/handles opened to

the volume will be closed.

Valid values: "yes", "no", "true" and "false"

Example

<force_dismount>yes</force_dismount>

format

Indicates whether or not the drive should be formatted after creation, and if the file system should

be created.

Valid values: "yes", "no", "true" and "false"

Example

gpt_disk

Initializes a disk as a „gpt disk“.

Valid values: "yes", "no", "true" and "false"

Example

<gpt_disk>yes</gpt_disk>

hash_unchanged_data

Indicates whether the unchanged data of an incremental image should be stored in the image as

a hash-value (checksums). This increases the size of the incremental image but will accelerate data

access for the next imaging procedure.

Valid values: "yes", "no", "true" and "false"

Example

<hash_unchanged_data>no</hash_unchanged_data>

huge

Indicates the drive that will be created, especially for labeling a large partition.

207 / 235