User Manual

User's guide O&O DiskImage Disk management functions

Note

You can create spanned volumes on dynamic volumes only.

At least two dynamic volumes are needed for creating an spanned volume.

A spanned volume can be expanded for as many as 32 dynamic volumes.

It is not possible to mirror spanned volumes or to convert them into stripe set volumes.

Spanned volumes are not fault-tolerant.

Example

<driveletter_to_set>S</driveletter_to_set>

</command>

create striped volume

Creates a stripe set volume with at least two selected dynamic volumes.

Parameter

size

{ devicename_one | drivenumber_one | serialnumber_one}

{ devicename_two | drivenumber_two | serialnumber_two}

[ driveletter_to_set ]

Note

At least two dynamic volumes are needed for creating a stripe set volume. A stripe set volume can

be created for as many as 32 storage volumes.

Stripe set volumes are not fault-tolerant, and can neither be extended nor mirrored.

Example

<drivenumber_one>2</drivenumber_one>

<drivenumber_two>3</drivenumber_two>

192 / 235