User Manual

User's guide O&O DiskImage Sector-based imaging functions
<device_type>filesystem</device_type>
<image_name>C:OODIImage_I.omg</image_name>
<image_object_id>1</image_object_id>
</command>
<command name="mount image">
<device_type>filesystem</device_type>
<image_name>C:OODIImage_I.omg</image_name>
<image_driveletter>F</image_driveletter>
<password>passwort</password>
<driveletter_to_set>I</driveletter_to_set>
</command>
restore image
Restores data from an image file onto one or more drives.
Parameters
device_type
image_name
[ password ]
{ target_devicename | target_driveletter | target_drivenumber | target_serialnumber |
target_begin }
[ driveletter_to_set ]
{ image_object_id | image_driveletter | image_drivenumber | image_begin }
[ set_bootable_partition_bootable ]
[ clear_target_drive ]
[ fill_empty_blocks ]
[ append_on_target_drive ]
[ chs_alignment ]
[ ignored_read_errors ]
[ignore_data_modification ]
[ write_data_directly ]
[ overwrite_target_data ]
[automatically_convert_multi_disk_volumes]
[automatically_create_target_drive_like_source_drive]
Notes
Important!
During the restoration process, the image will overwrite your target drive with the drive data saved
on the image. All data saved on the target drive is thereby lost and replaced by that of the image. If
the parameter "clear_target_drive" was set to true or yes, a confirmation dialogue about deleting
the target volume system will not appear!
183 / 235