User Manual

User's guide O&O DiskImage Sector-based imaging functions

<hash_unchanged_data>yes</hash_unchanged_data>

<ignored_read_errors>yes</ignored_read_errors>

<max_image_size>-1</max_image_size>

<ignored_file>pagefile.sys</ignored_file>

<ignored_file>hiberfil.sys</ignored_file>

</command>

dismount image

Unmounts a mounted image file as a virtual drive.

Parameters

{ devicename | driveletter | drivenumber | all_sources }

Example

</command>

mount image

Mounts an image file as a virtual drive.

Parameters

device_type

image_name

[ password ]

{ image_object_id | image_driveletter | image_drivenumber | image_begin | all_sources }

[ driveletter_to_set ]

Notes

Changes such as adding or deleting files are not possible on image files. When mounting the image

of an entire drive, it’s not possible to assign any drive letters.

When mounting an entire hard disk, the original layout will be displayed, i.e., it will be identified by

operating system partitions not contained in the image file. These drives, partitions/volumes are not

formatted and cannot be accessed using, for example, Windows Explorers.

Example

182 / 235