Specification Sheet

Test series and results
The following configuration was used on the test system:
1. Original state of the installed system with the above mentioned software (factory default setting)
2. Installation of O&O Defrag on the system and execution of OPTIMIZE / Complete defragmentation
(optimized with O&O Defrag)
Test series
Result
The average duration of a system start (measured as an average of 100 automated system starts)
was:
Configuration Result
Factory default state 30,87 sec
Optimized with O&O Defrag 21,76 sec
If the system is optimized with O&O Defrag, you can expect a 30% decrease in the time needed for
starting your system.
9