Technical information

Check drive
O&O Defrag - 45
Check drive
In the Ribbon bar under Check drive, you have the possibility to check the drive for errors. You can find the cor-
responding report as usual under the tab Reports. Checking the drives corresponds with the Windows chkdsk func-
tion, yet, it only can run scans in the read-only mode, and thus cannot correct errors. In case of error, you need to run
the chkdsk command manually.
It is strongly recommended to thoroughly check a drive if an error is detected. More information can be found in the Win-
dows Help file.
You can cancel the check by clicking on stop in the Ribbon.