manual

Customize settings
O&O CleverCache - 24
Customize settings
If you would like to modify the "default" settings in O&O CleverCache, it is first necessary that you create
a new Profile. For this, click on Profile/New profile on the Ribbon Bar.
Program settings can be reset to their default values at anytime. To do so, simply click Default settings
from the Profile Menu. Doing this will delete all profiles and changes made since the program's installation,
resetting the software to its original configuration.
More:
File Cache Settings
Mem-O-Free and Mem-O-Safe
System tuning
View
File Cache Settings
Four slide bars allow you to control the minimum and maximum amounts of the file cache in both meg-
abytes or as a percent of the total memory available.
Using the sliders you can define a maximum cache size in both megabytes or as a percent of the total main
memory. The maximum size of the file cache is either 960 MB or the full size of the main memory itself.
Should you enter in both values, the smaller value of two will be used. You can also set a minimum value for
the cache in megabytes.
A more detailed explanation of the issues surrounding caching in Windows can be found in the chapter
entitled "Caching Problems in Windows" .
Note: If you are using one of the O&O AutoSense profiles, it is not possible to make any changes to the
settings. To make manual changes, however, to these settings, it is necessary to first create a profile.