User Manual
 9
PAIRING INSTRUCTIONS
The NPCS650 Transmitter and Receiver come paired. If re-pairing is necessary use the 
below steps to reconnect the units.
•  Press and hold down the power button LED on the Receiver and plug in the power 
adapter. Release the Power button once the power LED blinks orange.
•  Plug the power adapter into the Transmitter. Press and hold down the pairing button.
•  The Power LED should be ashing white. The white ashing speed will begin to 
slow down. Once it has slowed down, release pairing button to enter pairing mode.
HDMI
Note: The Transmitter and Receiver should complete pairing and once LEDs change to 
solid white connection will be complete.










