User Guide
Note: The Transmitter and Receiver should complete pairing and once LEDs change to
solid white connection will be complete.
PAIRING INSTRUCTIONS
The NPCS650 Transmitter and Receiver come paired. If re-pairing is necessary use the below steps to 
reconnect the units.
HDMI
Press and hold down the power button LED on the Receiver and plug in the power adapter. Release 
the power button once the power LED blinks orange.
1
The Power LED should be flashing white. The white flashing speed will begin to slow down. Once it 
has slowed down, release pairing button to enter pairing mode.
3
Plug the power adapter into the Transmitter. Press and hold down the pairing button.
2






