User Guide

FREQUENTLY ASKED QUESTIONS NPCS600
1. What does the status of the LEDs mean?
2. What is the maximum transmission range?
The NPCS600 has a maximum range of 100 feet line of sight. Obstacles such as walls, doors, and wireless
routers may reduce the range or cause interference, however; every application is different.
3. The NPCS600 appears warm after prolonged use.
To transmit 3D or Full HD content wirelessly, the NPCS600 must process a large amount of data. Due to
this, the unit may run at warmer temperatures than other electronic devices. We have designed the
housing to provide proper ventilation to the unit as well as have designed the electronic components to
withstand temperatures up to 80°C. To ensure maximum performance ensure both the Transmitter and
Receiver are in well ventilated areas that do not exceed 30°C.
4. What are the troubleshooting steps if no video is displayed?
The Transmitter/Receiver may require a few seconds to connect. Ensure the correct HDMI video input is
selected on your TV and that your HDMI cables are connected properly. Check that your video resolution
from the source device is set to 1080p, 1080i, 720p, 576p, or 480p. Please ensure the NPCS600 is not
located near a wireless access point as interference may affect connectivity.
5. How can I extend my computer’s desktop using the NPCS600?
You can change the display type in the computer's display settings. Normal display options are "Extend",
"Duplicate" or "Show desktop only on...".
SOLID WHITE Transmitter/Receiver is linked.LINKED
FLASHING WHITE Transmitter/Receiver not in range. No HDMI Input connected.SEARCHING
SOLID ORANGE Receiver in power saving mode.STANDBY
SLOWLY FLASHING ORANGE Receiver is in pairing mode.PAIRING