User's Manual

Nyko Technolgies, Inc.
4
4、Shift
5、SPACE
6、X one
7、26 letters and commonly symbol keys
8、Enter
9、Back space
10、Stick head for five direction
11、XBOX one headset male jack
12、Rotating 3.5 headset male jack
13、3.5 female headset
14、2.4G code indicating lamp
Ⅴ、User Instruction：
1．Connect the host power firstly then connect HDMI cable with display equipment. you
open the console power of XBOX ONE while the indicator will be on.
2、Connect the controller with XBOX one console. (if have any question please check the
console specification.)
3、Aim its joint pin to XBOX one guide hole, aim headset to the back seat of xbox one
controller.then push the keyboard into the xbox one handle slowly until it
connect .(Note:New controller need the 3.5 headset plug,you should open the silicone
by arrow direction at the bottom of the keyboard,then turn 3.5 audio plug to external
rotation until it is connected.)
4、Under the power on status, put the 2.4G receiver to any USB port of XBOX ONE.and
enter the signal pairing key on the back of the xbox one keyboard within 15 seconds.It
will be paired when the blue indicator will glitter. (Note:when pairing,the distance of