Nyko Technolgies, Inc. SPECIFICATION FOR APPROVAL ： CUSTOMER： PRODUCT NAME： MODEL TYPE PAD DETAIL： V E R： FILE NUMBER: 86125 A1.
Nyko Technolgies, Inc. TYPE PAD CATALOG 1．Introduction and Application---------------------1 2，Product Image------------------------------------1 3．Product Size-------------------------------------1 4．The Introduction of Keyboard Interface-----------2 5．Instructions-------------------------------------4 6、Technical Parameters----------------- ----------5 7. Life Test Standard----------————- ----------5 8.
Nyko Technolgies, Inc. TYPE PAD Ⅰ、Production introduction and function application: 1. It is applied to TYX-581 XBOXONE controller keyboard which is designed and produced by Yuyuanxin. 2.The XBOX ONE controller keyboard is designed for a Microsoft XBOX ONE Handle.it can apply to original XBOX ONE old and new two kinds of handles perfectly. it will not affect the use of headphones.and be compatible the various of XBOX ONE console system (as image 1).
Nyko Technolgies, Inc.
Nyko Technolgies, Inc. 4、Shift 5、SPACE 6、X one 7、26 letters and commonly symbol keys 8、Enter 9、Back space 10、Stick head for five direction 11、XBOX one headset male jack 12、Rotating 3.5 headset male jack 13、3.5 female headset 14、2.4G code indicating lamp Ⅴ、User Instruction： 1．Connect the host power firstly then connect HDMI cable with display equipment. you open the console power of XBOX ONE while the indicator will be on. 2、Connect the controller with XBOX one console.
Nyko Technolgies, Inc. keyboard and receiving part must be within 0.5 meters,if pairing fails, try above steps again.) 5、It will work when the blue indicator will turn off after pairing. 6、Pair only once between the XBOX one keyboard with 2.4G receiver. Open the console to awake the controller automatically for future use. 7、Five direction analog stick similar to UP.DOWN.LEFT.RIGHT .A key function for stronger user’s experience.
Nyko Technolgies, Inc. the inspection requirements before test,slight deformation ,drops phenomenon. 2 Low temperature test：set the temperature in-20℃ and do the same steps as the high temperature test. 3 Button life test：inspection methods and conditions:install button on the fixture analog buttons,at a rate of 25 times/min,the level not less than 250g of evenly buttons,press/ release as a results.
Nyko Technolgies, Inc. ● Do not close to strong magnetic field ,electric field. ● Please avoid direct lighting or heating apparatus. ● Do not repair and reconstruct by yourself. ● Waste packing,batteries ,electronic products,old classification properly handle. FCC STATEMENT : This device complies with Part 15 of the FCC Rules.
