Owner's Manual
24 
CARE AND CLEANING 
Cooktop 
  To avoid electrical shock or burns, turn off controls and ensure the cooktop is cool before 
cleaning. 
  Before cleaning the cooktop, ensure that all burners are turned off and that all 
components are cool enough to safely touch. 
  Do not use harsh or abrasive cleaning agents, waxes, polishes, or commercial cooktop 
cleaners to clean the cooktop. 
  Use only a sponge, soft cloth, fibrous or plastic brush, and nylon pad for cleaning. 
  Always dry components completely before using the cooktop. 
Control Panel, Door Handle, Control Housing 
  Clean the control panel, door handle and control housing with a solution of mild 
detergent and warm water. 
  Do not use abrasive cleaners or scrubbers; they may permanently damage the finish. 
  Dry the components with a soft, lint-free cloth. 
Oven Window 
  Clean all glass surfaces with a solution of mild detergent and hot water.    Use a mild 
glass cleaner to remove fingerprint or smears. 
  Dry completely with a soft, lint-free cloth 
Porcelain Surfaces 
  Clean oven interior and inner door liners with a solution of mild detergents and hot water. 
Rinse and dry with a soft, lint-free cloth. Do not use abrasives or commercial oven 
cleaners. 
Stainless Steel Surfaces 
  Do not use any cleaning product with chlorine bleach. 
  Do not use a steel wool pad; it will scratch the surface. 
  Use a hot, damp cloth with a mild detergent.    Use a clean, hot, dmp cloth to remove 
soap.    Dry with a dry, clean cloth. 
 
Electrical Grounding Instructions: 
  CAUTION: Label all wires prior to disconnection when servicing controls.    Wiring errors 
can cause improper and dangerous operation. Verify proper operation after servicing. 










