Use and Care Manual

Surface Burner Ignition
Push to release gas.
Adjust to appropriate
flame height.
Turn to Ignite and ‘Hi’ position.
To light the surface burners, push and turn the appropriate control knob counter clockwise to a
“Hi” position. You will hear a clicking noise – the sound of the electric spark igniting the burner.
Once burner ignition has been achieved, turn the burner control knob to adjust the flame size. If
the knob stays at “Hi”, it will continue to click.
NOTE: When one burner is turned to the “Hi” position, all the burners will spark. Do not
attempt to disassemble or clean around any burner while another burner is on. Do not touch any
burner cap, burner base, or igniter while the igniters are sparking.
Heat Settings:
Hi Ignites the burners.
Low Melting large quantities.
Medium
Low-temperature frying, simmering large quantities, heating
milk, cream sauces, gravies.
COOKTOP OPERATION
16
Boiling liquid quickly, deep frying.