Owner's Manual
Care and Cleaning
Cooktop
• To avoid electrical shock or burns, turn off all controls and ensure the cooktop is cool
before cleaning.
• Before cleaning the cooktop, ensure that all burners are turned off and that all
components are cool enough to safely touch.
• Do not use harsh or abrasive cleaning agents, waxes, polishes, or commercial cooktop
cleaners to clean the cooktop.
•
Use only a sponge, soft cloth, fibrous or plastic brush, and nylon pad for cleaning.
Use
only
a
sponge,
soft
cloth,
fibrous
or
plastic
brush,
and
nylon
pad
for
cleaning.
• Always dry components completely before using the cooktop.
Control Panel, Door Handle, Control Housing
• Clean the control panel, door handle and control housing with a solution of mild
detergent and warm water.
• Do not use abrasive cleaners or scrubbers; they will permanently damage the finish.
•
Dry the components with a soft lint
free cloth
•
Dry
the
components
with
a
soft
,
lint
-
free
cloth
.
Oven Window
• Clean all glass surfaces with a solution of mild detergent and hot water. Use a mild
glass cleaner to remove fingerprint or smears.
• Dry completely with a soft, lint-free cloth.
Porcelain Surfaces
Cl i t i d i d li ith l ti f ild d t t d h t t
•
Cl
ean oven
i
n
t
er
i
or an
d
i
nner
d
oor
li
ners w
ith
a so
l
u
ti
on o
f
m
ild
d
e
t
ergen
t
an
d
h
o
t
wa
t
er.
Rinse and dry with a soft cloth. Do not use abrasives or commercial oven cleaners.
Stainless Steel Surfaces
• Do not use any cleaning product containing chlorine bleach.
• Do not use a steel-wool pad; it will scratch the surface.
• Use a hot, damp cloth with a mild detergent. Use a clean, hot, damp cloth to remove
soap. Dry with a dry, clean cloth.
soap.
Dry
with
a
dry,
clean
cloth.
WARNING
!
Electrical Grounding Instructions: this indoor gas cooking appliance is equipped
with a three-prong (grounding) plug for your protection against shock hazard and should be
plugged directly into a properly grounded three-pronged receptacle.
Do Not
cut or removes the grounding prong from the plug
Do
Not
cut
or
removes
the
grounding
prong
from
the
plug
.
Caution Label all wires prior to disconnection when servicing controls. Wiring errors can
cause improper and dangerous operation. Verify proper operation after servicing.
15