Instructions / Assembly

INSTALLATION REQUIRE
MENTS
Tools
a
nd
Parts
Gather
the required tools and parts before starting installation.
Read and follow the instructions provided with any tools listed
here.
Tools N
eeded
■
■
■
■
■
T
ape m
easure
■
Sma
ll, flat-blade screwdriver
■
#2
an
d
#3 Phillips screwdriver
■
Level
W
rench or pliers
Pipe wrench
Scissors or cutting pliers
(to remove tie-downs)
Noncorrosive leak-detection
solution
Loc
ation
R
equirements
WARNING
Parts
Supplied
■
■
■
Ex
plosion Hazard
Do not store fuel tank in a garage or indoors.
Do not store grill with fuel tank in a garage or indoors.
Failure to follow these instructions can result in death,
explosion, or fire.
WARNING
Fire Ha
zard
Do not use grill near combustible materials.
Do not store combustible materials near grill.
Doing so can result in death or fire.
Select a location that provides minimum exposure to wind and
traffic paths. The location should be away from strong draft
areas.
Do not obstruct flow of combustion and ventilation air.
Clearance to combustible construction for outdoor grills:
■
■
A min
imum of 24” (58.0 cm) must be maintained between the
front of the grill hood, sides and back of the grill and any
combustible construction.
A 24” (58.0 cm) minimum clearance must also be maintained
below the cooking surface and any combustible construction.
*See “Assistance or Service” section to order.
5
Gas
pressure regulator/hose assembly set for 11” WCP LP
gas.
3- “AA” size alkaline battery
Har
dware packet
Screws:W 3/32-32*2/5" 4pcs used to install the door