Instructions / Assembly

Pictur
e 6
Picture 5
Picture 7 Picture 8
No
te
: If you w
ant
to us
e
NG s
u
p
p
lier to th
is
g
r
ill, pl
e
as
e
re
fe
r
e
to
page 12, NG gas converson
.
LP Gas Connection
Gas
P
re
ssure
R
egulator
The gas pr
essure regulator supplied with this grill must be used.
Replacement gas pressure regulator/ hose assembly specific to your model,
is available from your outdoor grill dealer.
The inlet (supply) pressure to the regulator should be as follows
for proper operation:
LP Gas:
Operating pressure: 11” (27.9 cm) WCP
Inlet (supply) pressure: 11” (27.9 cm) WCP
LP gas Connecting system:
To connect the appliance to the remote self-contained gas supply system
must be rigid pipe, semi-rigid tubing, or a connector complying with the
Standard for Connectors for Gas Appliances, ANSI
Z21.24/CSA 6.10,ortheStandard for Connectors for Outdoor Gas
Appliances and Manufactured Homes, ANSI Z21.75/CSA 6.27
。
The max
imum length of the connection shall be 6 ft (1.82 m)
Warning: using semi-rigid tubing, aluminum or aluminum alloy
tubing is not permitted。
Hose Holder(supplied): (see picture 6.)
Drill two M6 holes to fix the hose holder on the wall. The height of the hose
holder should be same as the gas tank valve, When fixing the hose on the
wall, make sure the hose assembly is long enough to connect the regulator
to the cylinder when the cylinder stays out of the enclosure. ( fix the hose
position 7 inch from the regulator).
Install the 20 lb LP Gas Fuel Tank
This grill is equippe
d
for use with a 20 lb LP gas fuel tank (fuel
tank not supplied, purcha
sed
separat
ely).
A gas pressure regulat
or/hose
assembl
y
is supplied.
Any brand of 20 lb LP gas fuel tank is acceptable for use with the grill
provided they are compatible with the grill tank tray. The grill is also
design-
certified
by CSA Internati
onal
for local LP gas supply or for Natural
gas with appropriat
e
conver
sion.
The 20 lb LP gas fuel tank must be
mounted and secured. (NOTE: TANK TRAY NOT INCLUDED)
1. Ope
n
ca
bi
ne
t
do
ors
.
2. Lo
os
en th
e
ta
nk
tr
a
y lo
cki
n
g
sc
r
e
w.(
se
e
pi
c
t
ure
7)
3. Put the 20 lb LP gas fuel tank into the tank tray under the grill.
4. Clockwise Tighten the locking screw against the bottom collar of the
20 lb LP gas fuel tank to secure.
5, For easy installa
tion,
the tank vapor withdrawa
l
better face right
side.
6. Do not lean over the tank. Always keep the cylinder on upright
orientati
on
to provide vapor withdraw
al.
(See pictur
e
8)
10
Note: If you want to use NG supplier to this grill, please refer to
page 14, NG gas conversion.