Datasheet

3
Quick Start Guide
FEATURES
• 4 x SJA1124A
• SPI to LIN bridge
• Supports 16 x LIN master
channel connectors
• Arduino
TM
UNO footprint-
compatible shield
• Easy access to I/O header pins
• Power LED indicator
• VIO LED indicator
• INHN LED indicators
• Small form factor
STEP-BY-STEP
INSTRUCTIONS
This section describes how to use the
SJA1124 evaluation board as a hardware
plug-in board (shield) that supports up to
16 LIN master connections when plugged
on existing microcontroller development
boards.
The supply connector pin mapping of
J3 Header must be checked against
microcontroller board supply
connector. VBAT is the power supply
voltage (max 16V). VDD (3.3V / 5V),
P3V3 (3.3V) and P5V0 (5V) are
reference voltages. Otherwise
SJA1124 and other components on
the boards can be damaged.
Verification of Supply
Setting
1
Figure 3: J3 Header (supply connector)
MICROCONTROLLER
BOARD COMPATIBILITY
• S32K14xEVB
• DEVKIT-MPC574x
• DEVKIT-S12x
• FRDM-KEAx
• etc.