Datasheet
8
TJA1101 ETHERNET PHY TRANSCEIVER
The IEEE 802.3bw (100BASE-T1) compliant TJA1101 
Ethernet PHY transceiver provides 100 Mbit/s transmit and 
receive capability over unshielded twisted pair (UTP) cables 
to withstand the most taxing automotive applications, while 
still maintaining low-power consumption and system costs. 
TJA1101 APPLICATION 
The TJA1101 PHY transceiver provides robust, automotive-
grade signal quality with a bit error rate (BER) of at least 
1E-10 or less. It is optimized for capacitive signal coupling 
to the UTP lines and supports a cable length of at least 15 
meters. To comply with automotive EMC requirements, a 
common-mode choke (CMC) is typically inserted into the 
signal path. Communication with the media access control 
(MAC) unit can be realized via the MII or the RMII. 
TJA1102 DUAL ETHERNET PHY TRANSCEIVER
The TJA1102, the industry’s 
first 100BASE-T1 compliant 
dual-port Ethernet PHY 
transceiver, enables superior 
system efficiency for high-
speed networks. This robust 
and reliable transceiver offers 
100 Mbit/s per port full 
duplex and supports lightweight UTP cables of up to 30 m 
in repeater mode for challenging automotive applications.
TJA1101
• Single-port IEEE 802.3bw (100BASE-T1) PHY
• HVQFN-36 pin package (6 x 6 mm
2
) 
TJA1102 / TJA1102S
• Dual / single-port IEEE 802.3bw (100BASE-T1) PHY
• HVQFN-56 pin package (8 x 8 mm
2
) 
• Drop in compatible single-port product TJA1102S
TJA1101 / TJA1102 COMMON FEATURES 
• AEC-Q100 Grade 1 qualified 
• MII- and RMII-compliant interfaces
• Receive and forward CLK signal 
• Diagnosis of cabling errors (shorts and opens) 
PARTIAL NETWORKING
•  OPEN-Alliance-TC10-compliant sleep-and-wake-up 
forwarding solution 
  – Global system wake-up 
  – Robust remote wake-up detection via bus lines 
  – Wake-up forwarding on PHY level 
  – Go-to-sleep hand shaking 
  – Saves an additional wake-up line 
•  Local wake-up pin for wake-up line
LOW-POWER MODE 
•  Sleep mode current: 45 μA 
•  Dedicated PHY enable/disable input pin to minimize 
power consumption 
•  Inhibit-pin for voltage regulator control 
•  Single 3.3 V supply 
•  External 1.8 V supply option 
SOFTWARE AND TOOLS
•  Linux and low-level drivers
•  AUTOSAR 4.3.0 drivers
•  Customer Evaluation Board
AUTOMOTIVE APPLICATIONS 
• Gateway 
•  IP Camera, Radar and LIDAR links
•  Driver assistance systems 
•  Cluster & Infotainment
TJA110x Ethernet PHYs










