Datasheet

7
NXP SJA1105 ETHERNET SWITCH SERIES SELECTION TABLE
Features SJA1105 T P Q R S Benefits
Package and Interfaces
Operating temperature range: −40° C to +105°
C (Automotive Grade 2)
Flexible ECU design
Support for any type of Ethernet
PHY such as 100/1000BASE-T1 and
1000BASE-TX
Up to four cascaded switches controlled
by a single host
LFBGA159 12 x 12 mm
2
, 0,8 mm pitch
MII (3V3)/RMII (3V3)/RGMII (3V3) interfaces
MII/RGMII (all 1V8, 2V5, 3V3) and RMII (2V5,
3V3) interfaces
RGMII internal delay line
SGMII interface
Pin compatibility
Software compatibility
Switching
Hash-based L2 look-up table
Fine-grained control forwarding
decisions in the network
Powerful debugging and diagnostic
capabilities
TCAM-Based Frame Filtering
Double VLAN tagging support
RMON RFC 2819 Ethernet counters
VLAN-based egress tagging/un-tagging
Frame mirroring and diagnostic features
AVB/TSN
Credit-based shaping blocks for IEEE 802.1Qav 10 10 16 16 16 16
Key hardware features to enable the
implementation of a fully synchronized
network for:
Lip-synched playback of audio and
video streams
Data-transmission scheduling for TSN
networks
IEEE 802.1AS time stamping support
TSN IEEE 802.1Qbv: time-aware shaping
TSN IEEE 802.1Qci* (pre-standard): per-stream
policing
Security
Ingress rate limiting on a per-port and per-
priority basis for unicast/multicast and broadcast
traffic
Provisions for:
Authentication of the nodes connected
to the network
Limiting the data generated by one or
more connected devices
Port reachability limitation and disabling address
learning setting
MAC address whitelisting and blacklisting
Support for IEEE 802.1X-based authentication
mechanism
Learn process with “one-shot “option
Black dots: feature compatible with other similar black dots.
White dots: feature compatible with other white dots but NOT compatible with black dots.