Datasheet

10
NXP 100BASE-T1 PHY TRANSCEIVER FAMILY
Family Feature TJA1101 TJA1102S TJA1102 Description
Automotive
Package
HVQFN36
6 x 6 mm
2
HVQFN56
8 x 8 mm
2
HVQFN56
8 x 8 mm
2
Small size, saves PCB board space
Temperature range
-40 to +125
°C
-40 to
+125 °C
-40 to
+125 °C
Automotive Grade 1, high robustness to support automotive
applications
Unshielded twisted pair (UTP)
channel length up to at least
15 m 15 m 15 m
Low weight cable, high flexibility and low cost
Proper cable length fit for most automotive requirements
Repeater Mode 2 x 15 m Max cable length in repeater mode up to at least 30m
Interface MII/RMII MII/RMII MII/RMII Standard interfaces
Supply voltage 3.3 V 3.3 V 3.3 V Single supply, no need for external voltage regulators
Additional supply enabled 1.8 V 1.8 V 1.8 V Save power on component level
Data rate 100 Mbit/s 100 Mbit/s 100 Mbit/s Sufficient data rate to meet infotainment, ADAS requirements
Ethernet ports 1 1 2
Dual port solution saves ECU board place, simplifying system
layout and config
Pin-to-pin compatible
Port count scalability for platform solutions
Pin Strapping
HW config during start-up, allows autonomous operation
Signal quality indicator (SQI)
Makes channel effects visible
TC-10 compliant partial networking
OPEN-Alliance TC-10 compliant wakeup-and-sleep concept
Diagnosis
Over-temperature protection
Prevent device from getting damaged by over-temperature
Cabling error detection (shorts and
opens)
Remote diagnosis
Gap-free supply under-voltage
detection with fail-silent behavior
Prevents the PHY from running in an undefined state Increases
system level functional safety
Internal, external and remote
loopback mode
Allows system diagnostics of the communication path
Dedicated Enable (EN) pin
Emergency shutdown for system safety e.g. block suspicious
ECU
Low Power
Mode
Low-power sleep mode 50 μA 45 μA 45 μA Low power consumption to ensure battery level
INH switch controls ECU supply
Set automotive power modes
Local wake-up support
Most common and secured wake-up option