Datasheet

CONFIDENTIAL AND PROPRIETARY
7
S32K148 Customer EVB – Ethernet
For S32K148EVB-Q144, some ENET and
External Memory data lines are shared from the
MCU, each interface is separated by two 0
resistors, by default the ENET data lines are
enabled. In order to enable the ETHERNET
Interface, the next configuration must be done and
verified.
CIRCUIT
PART
REFERENCE
SIGNAL
NAME
DESCRIPTION
ENET
R198
PTD9/MII_RXD2
Populate
0 Ohms/0402
Resistors
R197
PTD8/MII_RXD3
R196
PTC17/MII_RMII_RX_DV
R195
PTC16/MII_RMII_RX_ER
R268
PTB4/MII_RMII_MDIO
R269
PTD6/MII_TXD2
R270
PTD5/MII_TXD3
R272
PTD7/MII_RMII_TXD1
R277
PTC0/MII_RMII_RXD1
R264
PTC1/MII_RMII_RXD0
R260
PTC2/MII_RMII_TXD0
R250
PTD10/MII_RX_CLK
R208
PTD12/MII_RMII_TX_EN
R210
PTD11/MII_RMII_TX_CLK
R212
PTC3/MII_TX_ER
External
Memory
R271
PTD7/QSPI_A_IO1
Depopulate
0 Ohms/0402
Resistors
R254
PTC2/QSPI_A_IO3
R209
PTD12/QSPI_A_IO2
R211
PTD11/QSPI_A_IO0
R213
PTC3/QSPI_A_CS
R244
PTD10/QSPI_A_SCK