Datasheet

CONFIDENTIAL AND PROPRIETARY
6
S32K148 Customer Validation Board – Ethernet
The S32K148 supports both MII and RMII Ethernet
interfaces. The S32K14xCVD-Q144 incorporates an
ENET board-to-board connector in order to install the
optional ENET cards.
Ethernet, SPI2, I2C0 GPIOs and RESET signals from
the S32K148 MCU are routed to ENET Connector. 3.3V,
5V and 12V (VSUP – Protected Battery Voltage,
disabled with 0-Ohms resistor) are available as power
supply references
Ethernet Connector
ONLY for RevA
• R123 and R96 must be removed
• R137 and R514 must be placed