Datasheet

2 KB (up to 32 KB D-Flash)
EEPROM emulated by FlexRAM
1
2 KB
FlexRAM (also available as system RAM)
Cache
25 KB
System RAM (including FlexRAM and MTB) 17 KB
Flash
128 KB 256 KB
2.7 - 5.5 V
Single supply voltage
HSRUN mode
Watchdog
1x
Number of I/Os
up to 43
up to 58
Memory protection unit
K116
K118
Parameter
Peripheral speed
CRC module
IEEE-754 FPU
ARM
®
Cortex™-M0+
Core
1x
EWM
DMA
Crossbar
capable up to ASIL-B
ISO 26262
HW security module (CSEc)
1
48 MHz
Frequency
up to 48 MHz
Error correction code (ECC)
1x
Low power timer (LPTMR)
1x
Low power interrupt timer
LEGEND:
Not implemented
Available on the device
1 No FTFC commands, including CSE commands (CSEc parts) are available when chip is in VLPR or HSRUN mode.
2 Available when EEEPROM, CSEc and Data Flash are not used. Else only up to 1,984 KB is available for Program Flash.
3 Up to 64 KB of flash is used as EEPROM backup and the remaining 448 KB of the last 512 KB block can be used as Data flash or Program flash.
See chapter FTFC for details.
4 Only for BSR
Trigger mux (TRGMUX)
1x
Real time counter (RTC)
FlexTimer (16-bit counter) 8 channels
2x (16)
External memory interface
1x (16)
2x
1x
100 Mbit IEEE-1588 ethernet MAC
12-bit SAR ADC (1 MSPS each)
1x
FlexIO (8 pins configurable as UART, SPI, I2C, I2S)
Low power I2C
Low power UART/LIN
(Supports LIN protocol versions 1.3, 2.0, 2.1, and SAE J2602)
SWD, MTB (1 KB), JTAG
4
Debug & trace
NXP S32 Design Studio (GCC) + SDK,
IAR, GHS, COSMIC, Lauterbach, iSystems
LQFP-48
LQFP-64
Packages
Ecosystem
(IDE, compiler, debugger)
QFN-32
LQFP-48
FlexCAN
(CAN-FD ISO/CD 11898-1)
1x
(1x with FD)
1x 2x
Low power SPI
Serial audio interface (AC97, TDM, I2S)
Comparator with 8-bit DAC
1x
Programmable delay block (PDB)
1x
S32K11x
S32K14x
K142 K144
K146 K148
1x
SWD, JTAG (ITM, SWV, SWO)
NXP S32 Design Studio (GCC) + SDK,
IAR, GHS, COSMIC, Lauterbach, iSystems
LQFP-64
LQFP-100
LQFP-64
LQFP-100
MAPBGA-100
LQFP-64
MAPBGA-100
LQFP-100
LQFP-144
MAPBGA-100
LQFP-144
LQFP-176
SWD, JTAG
(ITM, SWV,
SWO), ETM
1x (64)
2x (16) 2x (24) 2x (32)
1x
2x
3x
1x 2x
2x
(1x with FD)
3x
(2x with FD)
3x
(3x with FD)
3x
(1x with FD)
2x 3x
2x
1x
1x (73) 1x (81)
up to 112 MHz (HSRUN)
1x
ARM
®
Cortex™-M4F
1x
capable up to ASIL-B
up to 112 MHz (HSRUN)
4 KB (up to 64 KB D-Flash)
4 KB
4 KB
32 KB 64 KB 128 KB 256 KB
-40 to +85ºC / +105ºC / +125ºC
256 KB 512 KB 1 MB 2 MB
2
2.7 - 5.5 V
up to 89 up to 128 up to 156
1x
1x
1x
4x (32) 6x (48) 8x (64)
QuadSPI incl.
HyperBus™
2x
4 KB (up to 512 KB D-Flash
as a part of 2 MB Flash)
3
MemoryAnalog
Timer
Communication
IDEs
Other
System
-40 to +85ºC / +105ºC / +125ºC
Operating temperature (T
a
) Temperature ambient
1x (43)
1x (45)
1x (14)
FIRC CMU
Low power modes
Figure 3. S32K1xx product series comparison
Feature comparison
S32K1xx Data Sheet, Rev. 4, 06/2017
6
Preliminary
NXP Semiconductors