Datasheet

2
CONFIDENTIAL AND PROPRIETARY
Step-by-Step Installation Instructions
1
Install Software and Tools
Install
CodeWarrior Development
Studio v11 for S12Z devices. CodeWarrior Dev Tools for MagniV
MCUs
2
Connect the USB Cable
Connect one end of the USB cable to the PC and the other end to
the mini-B connector on the S12ZVMAEVB board. Allow the PC to
automatically configure the USB drivers if needed.
3
Using the Example Project
Load the example code contained in your quick start package to
enable the push buttons and the potentiometer..
4
Learn More About the S12ZVMA
Read the release notes and documentation on the
nxp.com/S12ZVMA.
• The Processor Expert graphical initialization software included in
your CodeWarrior installation will help reduce your time to
market
In this quick start guide, you
will learn how to set up the
S12ZVMAEVB board and
run the default exercise.