Datasheet

Quick Start Guide
Table 1 - Default Jumper Positions
Jumper Setting Description
J3 pins 1-2 closed Analog Inputs/Port AD/Keyboard Wake Up
J9
pins 1-2 closed
Jumpers to energize the relay load. It is needed to have
all the jumpers installed
pins 3-4 closed
pins 5-6 closed
J10
pins 1-2 closed
Routing of TIMER0-3, LINPHY and GPIO0 to J15 Header
Connector and LEDs D10 to D13
pins 4-5 closed
pins 7-8 closed
pins 10-11 closed
J11
pins 1-2 closed
Routing PWM0 - ETRIG0, PWM1 - ETRIG1, HALL_SENSOR - GPIO1
and IRQ_N - GPIO2 to J15 Header Connector. Also connects
IRQ/GPIO2 to a pull up resistor.
pins 4-5 closed
pins 7-8 closed
pins 10-11 closed
J20 closed MCU 5 Volts Output
J21 closed Low-Side Driver 0 to LED output
J22 closed Low-Side Driver 1 to LED output
S12VR64EVB Jumper List and Description