Datasheet

Quick Start Guide
Install CodeWarrior
Development Studio
The S12VR64EVB board ships with
the latest version of CodeWarrior
Development Studio for Freescale
HCS12(X) Microcontrollers. CodeWarrior
Development Studio is a complete
Integrated Development Environment
(IDE) that provides a highly visual and
automated framework to accelerate
the development of the most complex
embedded applications.
NOTE: CodeWarrior Development Studios must
be properly installed before attempting to connect
the target board to the host PC. Otherwise, the
necessary USB drivers will not be available and the
host PC will not recognize the board.
CodeWarrior Development Studio for HCS12(X) V5.1
is included on the DVD provided and can be found
on the main screen or on the software tab.
Install CodeWarrior
Service Pack for S12VR
Family Microcontrollers
Double click on the link for the S12VR
service pack. This patch contains
header files for the S12VR family
microcontrollers.
NOTE: CodeWarrior Service Pack for S12VR is
included on the DVD provided and can be found on
the main screen or on the software tab.
Launch the Demo
Program
The DVD contains a CodeWarrior project
to exercise the BATS module, ADC, high-
side drivers, the relay using low-side
drivers, Port T and SCI module. Please
follow the instructions below to compile
and load this code.
NOTE: If you want to connect a load on the relay
outputs, you’ll need to use a power supply with
a higher current output connected to the power
supply banana connectors J4 and J5.
1 2
3