Quick Start Guide S08PB16-EVK
Quick Start Guide GET TO KNOW THE S08PB16-EVK Power/OSBDM Micro USB D6 SW1 Reset J13 JM60 BDM Header J2 Header J3 Header PB16 BDM Header S08PB16 J1 Header J4 Header NC-2 1-PTA2 P3V3-4 3-PTA1 NC-6 5-PTB5 P3V3-8 7-PTB4 NC-10 9-PTC3 NC-19 20-NC NC-17 18-NC NC-15 16-NC NC-13 14-GND NC-11 12-NC PTA3-9 10-NC PTB3-7 8-NC NC-5 6-NC NC-3 4-NC GND-12 11-PTC2 GND-14 13-PTC1 NC-1 2-NC P5V_MC_IN-16 15-PTC0 NC-15 16-NC NC-13 14-NC NC-2 1-NC NC-11 12-NC NC-4 3-NC NC-9 1
www.nxp.com STEP-BY-STEP INSTRUCTIONS 1. Connect the S08PB16-EVK to a PC using the included Micro USB cable to power/ OSBDM Micro USB connectors (J15) of S08PB16-EVK board. A green LED (D6) will illuminate, indicating power is on. 2. The S08PB16-EVK comes pre-programmed with a demo to test the onboard RGB LED (D8), potentiometer (R38) and buttons (SW2, SW3). First, turn on the power and the red LED, blue LED and green LED will toggle once.
SUPPORT Visit www.nxp.com/support for a list of phone numbers within your region. WARRANTY Get Started Download installation software and documentation at www.nxp.com/S08PB16-EVK. Visit www.nxp.com/warranty for complete warranty information. www.nxp.com NXP and the NXP logo are trademarks of NXP B.V. All other product or service names are the property of their respective owners. ©2019 NXP B.V.
