Datasheet

NXP Semiconductors

UM10935

PN7150 NFC Controller SBC Kit User Manual

UM10935

All information provided in this document is subject to legal disclaimers.

User manual

COMPANY PUBLIC

Rev. 1.1 — 18 May 2016

348011

3 of 23

1. Introduction

The present document describes the OM5578/PN7150S demonstration kit, a flexible and

easy-to-use Single Board Computer (SBC) Kit for the PN7150 NFC Controller.

It enables the development of an NFC solution based on PN7150 in a Linux, Android or

Windows for IoT environment or even in system based on RTOS or without OS.

It exists in different configurations:

- OM5578/PN7150RPI to be used with Raspberry Pi platform (see [1])

- OM5578/PN7150BBB to be used with BeagleBone Interface Board (see [2])

- OM5578/PN7150ARD to be used with platforms offering Arduino compatible

interface (see [3]), like LPCXpresso (see [5]) or Kinetis Freedom (see [4]).

This document presents first an overview of the kit.

Then, it gives printed circuit boards details.

Finally, it provides information for reuse of the kit in different environments.

This kit is registered as FCC certified module (FCC ID: OWROM5578-PN7150S)