Datasheet

Features
• On-board, high-speed USB based, Link2 debug probe with CMSIS-DAP and SEGGER J-Link
protocol options for debug of installed module
o UART and SPI port bridging from module target to USB via the on-board debug probe
o Can be used with external debug probe connected to target module
o On-board Link2 can be used to debug and off-board target
• 2 x user LEDs
• Target reset, ISP/user (3) and user buttons
• Arduino UNO compatible expansion site
• On-board 3.3V regulator with external power supply options
• 128Mb Winbond SDRAM
• Knowles SPH0641LM4H digital microphone
• Micro SD card slot
• NXP MMA8652FCR1 accelerometer
• Stereo audio codec with line in/out
• Full speed USB port with micro A/B connector for host or device functionality
• High speed USB device port
• 10/100Mbps Ethernet (RJ45 connector)
• 272x480 color LCD with capacitive touch screen
Kit Contains
• 1–IoT module base board
Supported Devices
• LPC540XX: Power-Efficient Microcontrollers (MCUs) with Advanced Peripherals Based on
Arm
®
Cortex
®
-M4 Core