Datasheet

NXP Semiconductors

UM11035

LPCXpresso boards for LPC546xx/LPC540xx/LPC54S0xx families of

MCUs

UM11035

All information provided in this document is subject to legal disclaimers.

User manual

Rev. 2.1 — 7th January 2019

4 of 36

Fig 1. LPCXpresso546x8/540xx/54S0xx underside view

This document describes the hardware of the LPCXpresso546x8/540xx/54S0xx boards,

plus information on the CAN-FD shield supplied in the OM13094 kit (this shield board is

also available as a standalone product, order code OM13099.) This shield board can be

used with any of the LPCXpresso boards described, but note that the LPCXpresso54608

does not support CAN-FD.

The following aspects of interfacing to the board are covered by this guide:

• Main board features.

• Setup for use with development tools.

• Board interface connectors.

• Jumper settings.

2. Feature summary

The LPCXpresso546x8/540xx/54S0xx board includes the following features:

• On-board, high-speed USB based, Link2 Debug Probe with CMSIS-DAP and

SEGGER J-Link protocol options:

 Link2 probe can be used with on-board LPC546x8/540xx/54S0xx or external

target.

 UART and SPI port bridging from LPC546x8/540xx/54S0xx target to USB via the

on-board Debug Probe.

 Support for external Debug Probe.